Drawer Racks: Sheet Storage in Drawers

Sheet Storage Drawer Rack Systems for Appropriate and Intelligent Warehousing of Sheets and other Flat Material

Sheet storage units in form of racks featuring drawers do not only furnish the basis for a safe short- or long term inventory strategy, but also prove beneficial for most economical consumption of space. This property generates enhanced capacities compared to conventional methods for piling of material. Corresponding drawers ensure careful warehousing, allowing permanent access to all levels for optimum availability of raw material and finished products. Well-adapted construction of drawer elements enables careful handling by crane or stacker to be simplified, this way abbreviating transport distances. All of these factors without any doubt contribute to further optimization of production and working processes and increased profitability. These modular sheet storage systems, developed and continuously upgraded by storemaster®, represent an investment with amortization within shortest periods. Detailed configurations tailored to the particular conditions of the concerned production sector can be implemented on site without any problem. This excellent flexibility is the most outstanding feature of all storemaster® logistics solutions and unique on the market. All drawer systems in principle can be extended to:

MasterTower® 1-Man-Sheet-Handling-Storage-Compact-Station (since 2001) by means of

OverheadTop Additional Sheet Storage for Wood and System Pallets, to be Operated by Stacker

TowerCrane System-Integrated Pillar-Jib Crane

+ HandlingMaster Sheet Manipulator

 storemaster® Drawer Systems at a Glance:

TwenTower

20 Sheet Storage Drawers for De-palletized Sheet Stacks – since 1998

Drawer Sheet Storage for all sizes up to 6.000 x 2.000 mm – capacity up to 3 t per drawer, i.e. large size system with pivoted rolling cheeks and pulling out of 2 m for upper drawer: 13 drawers for 3 t each/ 15 drawers for 2.5 t each/ 19 drawers for 1.75 t each; Supply / Unloading at One or Either Side


De-palletizing of Sheet Stacks  +  Loading of Drawers


TO BE ELECTRIFIED DRAWERS

Electrical drawers

Electrical drives for pulling out of drawers are available for all systems with a drawer load up from 2.5 t.

Insertion resp. extraction of the individual drawer levels is coupled to a control panel featuring a dead man’s button. Control panel and switch cabinet in compact design are integrated in single or double-side standard storage tower, delivered in state ready for use.

For drawer dimensions of up to 6 x 2 m and loads of up to 10 t (standard), pulling-out is carried out in transversal direction, longitudinal action enables dimensions to be enlarged to 16 x 4 m, with loads of up to 20 t.

In a situation of system failure or power outage, manual operation remains still available.

10 Years Warranty

Schubladen Elektrifizierung Motor Überblick 2
Schubladen Elektrifizierung Motor bedienung

TwenTower+

25 Drawers for Flat Goods – since 1998

Drawer Rack System up to Large Size with Filling Height for Drawers of 30 mm

For extended choice of flat goods at lower inventory level

As well as for intermediate storage of Residual Sheets.

Rolling cheeks

Pivoted or fixed at choice,

Supply / Removal from One or Either Side

TO BE ELECTRIFIED DRAWERS

Electrical drawers

Electrical drives for pulling out of drawers are available for all systems with a drawer load up from 2.5 t.

Insertion resp. extraction of the individual drawer levels is coupled to a control panel featuring a dead man’s button. Control panel and switch cabinet in compact design are integrated in single or double-side standard storage tower, delivered in state ready for use.

For drawer dimensions of up to 6 x 2 m and loads of up to 10 t (standard), pulling-out is carried out in transversal direction, longitudinal action enables dimensions to be enlarged to 16 x 4 m, with loads of up to 20 t.

In a situation of system failure or power outage, manual operation remains still available.

10 Years Warranty

Schubladen Elektrifizierung Motor Überblick 2
Schubladen Elektrifizierung Motor bedienung

ShuttleMaster

Sheet Storage – Exchange Tower for Sheet Stacks on System Pallets or One-Way Wood Pallets – since 2008

Drawer System

For Temporary Storage of

For Exchange of any Number of Sheet Types

Allowing Direct Access at the Machine

with Pivoting Rolling Cheeks

for Pulling Out for Upper Drawer of up to ca. 2 m

e.g. for Large Size Cassette-Flats:

13 Exchange Carts with 2.8 t Load Each / 15 Exchange Carts with 2.0 t Load Each /

19 Exchange Carts with 1.2 t Load Each

Supply / Unloading at One or Either Side,


TO BE ELECTRIFIED DRAWERS

Electrical drawers

Electrical drives for pulling out of drawers are available for all systems with a drawer load up from 2.5 t.

Insertion resp. extraction of the individual drawer levels is coupled to a control panel featuring a dead man’s button. Control panel and switch cabinet in compact design are integrated in single or double-side standard storage tower, delivered in state ready for use.

For drawer dimensions of up to 6 x 2 m and loads of up to 10 t (standard), pulling-out is carried out in transversal direction, longitudinal action enables dimensions to be enlarged to 16 x 4 m, with loads of up to 20 t.

In a situation of system failure or power outage, manual operation remains still available.

10 Years Warranty

Schubladen Elektrifizierung Motor Überblick 2
Schubladen Elektrifizierung Motor bedienung

ExchangePortal

Device for Quick Exchange of Sheets + Disposal of Residual Grates + Collection of Parts

By means of this manual exchange portal for system pallets (flats of all kind) with a capacity of up to 3 t, the waiting phase for the sheet type of the following task, may be reduced to zero. This cost-efficient solution is advisable particularly in the case of long cutting cycles and large numbers of identical sheets per task. Further useful options include disposal of residual grates (refer to special flat for residual grates), removal of finished products or entire plates after cutting, resp. integration into other production sequences. Sheet supply or removal may be take place at either transfer point in all of the three directions.

10 Years Warranty

GigaTower

For Sheets up to 16.000 x 4.000 mm and 20 t Load per Drawer

Example:

External Store as >Cold Warehouse< for Sheets after Sandblasting.

10 Years Warranty